Product ID:60 SN/2 CU/38 PB ROSIN CORED WIRE
MSDS Date:01/31/1991
FSC:3439
NIIN:00N055580
MSDS Number: BWBLD

FEDERATED-FRY METALS

6TH AVE & 41ST ST
ALTOONA, PA 16602
US

Emergency Phone: 814-946-1611;800-424-9300(CHEMTREC)

Info Phone: 814-946-1611

Cage: 65172

FRY TECHNOLOGY DIV OF COOKSON AMERICA INC

ALTOONA, PA 16602 US

Telephone: 814-946-1611

Cage: 65172

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 58-59%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

36.5-37.5

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: <37.5%

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.15 MG/M3; DUST

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

Fraction By Weight: 2%

OSHA PEL 0.1MG/M3 FUME;1 DUST

ACGIH TLV: 0.2 MG/M3 FUME

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

(ORAL, RAT) > 500 MG/KG

CAS: 8050-09-7

Fraction By Weight: 1-3%

OSHA PEL N/K

ACGIH TLV: N/K

BEFORE EATING, DRINKING, SMOKING OR

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENT 4
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: ROSIN FUMES DURING SOLDERING CAN
BE IRRIT. SKIN: MOLTEN SOLDER WILL CAUSE BURNS. PRLNG EXPOS TO
ROSIN FUMES MAY CAUSE IRRIT. NO ADVERSE EFTS KNOWN FROM SKIN
ABSORPTION. INGEST: DUST/FUMES INGEST ION MUST BE AVOIDED. LEAD IS
TOX & CUMULATIVE, AFFECTING KIDNEYS & NERVOUS SYS. SYMPS INCL
ANEMIA, (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: INSOM, WEAK, IRRITABILITY, CONSTIP &
STOM PAINS. TIN IS NOT REGARDED AS TOX BUT EXCESS EXPOS CAN CAUSE
FEVER, NAUS, STOM CRAMPS/DIARR. COPPER IS MOD IRRIT TO LINING OF
STOM & INTESTINES. INH AL: ROSIN FUME CAN CAUSE IRRIT OF RESP
TRACT, DIZZ, HDCH, ETC. BUT HAS LOW TOX. OVEREXP TO LEAD IS
UNLIKELY AS (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FOR FUME IRRITATION, REMOVE FROM EXPOSURE. SKIN: FOR
BURNS, COOL WITH COLD WATER AND GET MEDICAL TREATMENT. INGESTION:
GET MEDICAL HELP IMMEDIATELY. INHALATION: REMOVE TO FRESH AIR. IF
BREATHING IS DIFFICULT, ADMINISTER OXYGEN AND GET MEDICAL
ATTENTION.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:IF MOLTEN, ALLOW TO COOL AND SOLIDIFY THEN
SCRAPE UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NO SPECIAL REQUIREMENTS.
Other Precautions:LEAD WARNING LABELS (IF APPLICABLE). KEEP OUT OF
REACH OF CHILDREN. FOR INDUSTRIAL USE ONLY. DO NOT TAKE INTERNALLY.

Respiratory Protection:REQUIRED IF TLV'S ARE NOT BEING MAINTAINED. USE
NIOSH/MSHA APPROVED RESPIRATOR FOR TOXIC DUST &/OR FUME. NOTE: SEE
29 CFR 1910.1025 SUBPART (F) OF OSHA'S LEAD STANDARD.
Ventilation:REQUIRED TO PREVENT OPERATORS BREATHING FUMES DURING
SOLDERING.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NO FOOD, DRINK/TOBACCO SHOULD BE ALLOWED WHERE
CORE SOLDER IS USED. WASH HANDS THORO AFTER HNDLG CORE SOLDER &
(ING 5)
Supplemental Safety and Health
EFTS OF OVEREXP:SIGNIFICANT FUMES IS NOT PRDCED <700F. CHRONIC:LEAD
APPEARS ON THE NAVY LIST OF OCCUP CHEM REPRO HAZS. SEEK
CONSULTATION FROM APPROP HLTH PROFESSIONALS CONCERNING LATEST HAZ
LIST INFO & SAFE HNDLG & EXPOS INFO. PRLNG OVEREXP TO LEAD MAY
CAUSE DMG TO CNS & KIDNEYS. OVEREXP TO TIN IS NOT EXPECTED.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:644F,340C
Vapor Pres:NOT VOLAT
Vapor Density:NOT VOLAT
Solubility in Water:NIL
Appearance and Odor:SILVER TO GREY WIRE; NO ODOR.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, STRONG ACIDS, HALOGENS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:FUMES EMITTED IN SOLDERING OPERATION
MAY CONTAIN FORMALDEHYDE, CARBON MONOXIDE, ROSIN & ROSIN
DERIVATIVES.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS . RETURN FOR REPROCESSING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.